Making Various Settings After Installation; Installing Hbanyware - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

3. After a moment, the language selection window appears. Select [English] for installation in English.
4. In the initially displayed window, click the [Next] button.
5. Select [Deployment] in the [Welcome to ServerView Installation Manager] window.
6. Select an installation mode and the operating system to be installed. Then, set up the operating system.
7. Click [Install]. Installation begins.
Replace the media with the operating system installation media according to the SVIM instructions.
8. After the installation of the operating system, you will be asked to insert the FJ-LSP DVD. If you have a
SupportDesk Service agreement, insert the FJ-LSP DVD into the remote storage device according to the
instructions.

5.1.3 Making various settings after installation

Make various settings by referring to CHAPTER 5 Work after Operating System Installation (PRIMEQUEST
1800E2) or CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) in the
PRIMEQUEST 1000 Series Installation Manual (C122-E107EN).

5.1.4 Installing HBAnyware

Remarks
For RHEL 5.6 or later, read "HBAnyware" as "OneCommand Manager."
1. Install HBAnyware.
2. The libnl package is required to use HBAnyware. Install the libnl package. The libnl package is also
included in OneCommand Manager.
From the webpage at the following URL, download the SNIA HBA API Library, and install it:
http://jp.fujitsu.com/platform/server/primequest/download-e/
129