Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 36

San boot environment configuration manual
Hide thumbs Also See for PRIMEQUEST 1000 Series:
Table of Contents

Advertisement

Remarks
If the list of drivers is not displayed on a single page on the screen, enter "drivers -b".
The list is displayed in units of pages on the screen.
Display in cases with a mixture of different UEFI driver versions for the FC card
The list displays multiple [Emulex SCSI Pass Thru Driver] lines.
In the following example, [00041214] and [00040011] in the [Emulex SCSI Pass Thru Driver] lines
indicate the UEFI driver versions. This means that there are two UEFI driver versions.
In this case, replace UEFI drivers for FC cards to make all the versions the same. Then, try this operation
again.
FIGURE 2.2
Remarks
If the list of drivers is not displayed on a single page on the screen, enter "drivers -b".
The list is displayed in units of pages on the screen.
Example of driver list output (2)
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 1800e2Primequest 1800e

Table of Contents