3.
The following screen appears. Use the [+] key and [-] key to move FC to the top. Press the [Enter]
key.
FIGURE 6.11 [Change Legacy HDD Boot Priority] screen (for changing the order of
4.
Press the [Enter] key to return to the previous screen (Figure 6.11 [Change Legacy HDD Boot
Priority] screen (for changing the order of HDDs) ). Select [Commit Change and Exit]. Press the
[Enter] key.
Press the [Esc] key to return to FIGURE 6.4 [Boot Manager front page] screen.
This completes the setting of the boot order.
Configuring an SAS disk as a non-boot device
1.
Open [Change the order] from the [Change Legacy HDD Boot Priority] menu.
2.
Place the cursor on the SAS disk, and press the [Space] key.
3.
The SAS disk becomes a non-boot device, indicated by two slashes ("//") added to the beginning of
the SAS disk name.
4.
Press the [Enter] key to return to the previous screen.
5.
Execute [Commit Changes and Exit] to exit.
6.
Open [Change Legacy HDD Boot Priority] again for confirmation.
7.
Confirm the following:
HDDs)
155