Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 149

1. After powering on the partition, press any key ([Space] key, for example) other than the [Enter] key
while the FUJITSU logo is displayed, to display the Boot Manager Front Page.
2. Select the following items from the menu in the following order, on the Boot Manager Front Page:
[Boot Maintenance Manager] - [Boot Options] - [Change Boot Order] - [Change the order]
3. Specify [UEFI:DVD/CD 0] as the highest-priority device to boot from remote storage.
FIGURE 5.1
The following table describes the meaning of the menu.
TABLE 5.1
Menu item
UEFI: Embedded DVD/CD
Legacy Boot
UEFI Shell
4. Specify [Commit Changes and Exit] - [Reset System] to reboot the partition.
2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
[Change Boot Order] menu
[Change Boot Order] menu
Specify this item when using the built-in DVD drive for installation in
UEFI mode.
Specify this item for BIOS mode. Also specify [Legacy Boot] when
using the built-in DVD drive for installation in BIOS mode.
Do not use this item.
128
Description