Speed And Topology Settings - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2.2.8 Speed and Topology settings

The following describes how to make the Speed and Topology settings.
Static Topology setting
On the [Adapter Configuration Main Menu] screen, make the following setting that corresponds to the
connection pattern (Fabric connection/FCAL connection).
Fabric connection: Point to Point.
FCAL connection: FCAL
Note
Do not set [AUTO Loop First - default.] or [AUTO Point to Point first.]. First, make the above fixed setting.
Otherwise, the connected device will not be normally recognized.
1. Select [2. Configure HBA Parameters], and then press the [Enter] key.
FIGURE 2.19 Static Topology setting (1)
30