Displaying The Hba List - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

FIGURE 2.7
Remarks
If the list of drivers is not displayed on a single page on the screen, enter "drivers -b".
The list is displayed in units of pages on the screen.

2.2.2 Displaying the HBA list

1. Select [Force boot into EFI Boot Manager] from [Boot Selector] in the [Power Control] window of the
MMB. Then, turn on the power. Start the UEFI Shell.
.
2 From the UEFI Shell, enter the following command to display an HBA list.
Driver identification numbers are those displayed in the leftmost column in FIGURE D.2 Example of driver
list output.
Specify the driver identification number of the driver whose [DRIVER NAME] is displayed as [Emulex
SCSI Pass Thru Driver].
It is C4 in FIGURE 2.7 Example of driver list output (4).
Example of driver list output (4)
20