Various Post-Installation Settings - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

TABLE 4.1
Menu item
UEFI: Embedded DVD/CD
Legacy Boot
UEFI Shell
4. Specify [Commit Changes and Exit] - [Reset System] to reboot the partition.
2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
3. After a moment, the language selection window appears. Select [English] for installation in English.
4. In the initially displayed window, click the [Next] button.
5. Select [Deployment] in the [Welcome to ServerView Installation Manager] window.
6. Select an installation mode and the operating system to be installed. Then, set up the operating system.
7. Click [Install].
Installation begins.
Replace the media with the operating system installation media according to the SVIM instructions.

4.1.3 Various post-installation settings

Make various settings by referring to CHAPTER 5 Work after Operating System Installation (PRIMEQUEST
1800E2) or CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) in the
PRIMEQUEST 1000 Series Installation Manual (C122-E107EN).
[Change Boot Order] menu
Specify this item when using the built-in DVD drive for installation in
UEFI mode.
Specify this item for BIOS mode. Also specify [Legacy Boot] when
using the built-in DVD drive for installation in BIOS mode.
Do not use this item.
114
Description