Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual page 3

Storage of accessories
Keep the accessories in a safe place because they are required for server operation.
Organization and Notation of This Manual
This section describes the following topics:
- Organization of this manual
- Manuals for the PRIMEQUEST 1000 series
- Related manuals
- Abbreviations
- Notation
- Notation for the CLI (command line interface)
- Notes on notations
- Alert messages
- Product operating environment
- Trademarks
Organization of this manual
This manual is organized as follows.
CHAPTER 1 Configuring the SAN Boot Environment
Chapter 1 describes the procedure for installing the SAN boot environment and provides notes on design.
CHAPTER 2 Settings on the Fiber Channel Card (FC Card)
Chapter 2 describes the settings to be made on the FC card to start the system from an LUN of the SAN
storage unit in the FC SAN boot environment.
CHAPTER 3 Settings on the Converged Network Adapter
Chapter 3 describes the settings to be made on the Converged Network Adapter to start the system from an
LUN of the SAN storage unit in the FCoE SAN boot environment.
CHAPTER 4 Installing Windows
Chapter 4 describes how to install Windows in the FC SAN boot environment.
CHAPTER 5 Installing RHEL
Chapter 5 describes how to install Red Hat Enterprise Linux (RHEL) in the FC SAN boot environment.
CHAPTER 6 Installing SUSE Linux Enterprise Server 11 Service Pack 2
Chapter 6 describes how to install SUSE Linux Enterprise Server 11 Service Pack 2 (SLES11 SP2) in the
FC SAN boot environment.
CHAPTER 7 Installing VMware
Chapter 7 provides a link to the guides provided by VMware, Inc.
ii