Static Link Speed setting
With EFI-Bios, make the following setting that corresponds to the connection link speed (2 Gbps/4 Gbps/8
Gbps).
Note
Do not set [Auto negotiate - Default]. First, make the fixed setting for Link Speed. Otherwise, the connected
device will not be normally recognized.
1. After making the static topology setting, press the [Esc] key to return to the screen in FIGURE 2.20 Static
Topology setting (2).
2. Select [4. Force Link Speed], and then press the [Enter] key.
FIGURE 2.25
[4. Force Link Speed] selected on the screen
34