Advertisement
5. On Screen Display
①,②
③
①,②
<Fig5-1. Operating OSD display position>
5.1 How to display Operating OSD
a. Pressing the MENU key softly confirm current Operating OSD.
It is disappeared a few seconds later if there are no other key actions.
b. Even though Operating OSD is disappeared,
it keep displaying Camera ID or Title in screen.
In order to do not display ID, one method is to change EEPROM data
of Camera, the other is to use external communication through RS-232C.
c. Using RS-232C communication, change display position of ID;
Bottom Right -> Top Left -> Top Right -> Non display.
* If display Operating OSD is not needed by special purpose
like using external text overlay board, it can be OFF mode at all times
through external communication control as RS-232C, RS485.
FUNCTION
①
CAMERA ID
①,②
②
④
⑤
③
Back Light
④
①,②
⑤
WB MODE
- 11 -
OSD Format
DESCRIPTION
Non display
In case that ID is 0
ID : 002
In case that ID is 1 ~ 255
■■...■■
TITLE
Refer to. 5.7
Non display
Back Light OFF
H.BL M.BL L.BL
Back Light ON
Shutter
1/60 (1/50)
Normal Shutter
Speed
( NTSC:1/60 PAL :1/50 )
FL
Flickerless ON
( NTSC:1/120,PAL 1/100)
1/250
1/250
1/500
1/500
1/1000
1/1000
1/2000
1/2000
1/4000
1/4000
1/10000
1/10000
1/30000
1/30000
1/50000
1/50000
ATW
Auto Trace White Balance
AWC
One Push mode
IN
Indoor Preset (3200°K)
FRS
Fluorescent mode (4200°K)
USR
User mode (4700°K)
OUT
Outdoor Preset (6300°K)
MWB
Manual WB mode
Advertisement
