Table of Contents
Advertisement
5.2
DISPLAY OPTIONS, CONTINUED
5.2.5
Startup Screen Message
From the DISPLAY OPTIONS menu,
select 5 to turn the startup screen display
ON or OFF.
If the startup screen display is ON,
it displays the standard screen.
If the startup screen is OFF, an alternate
screen is displayed upon power up.
5.2.6
Change Camera Name Location
From the DISPLAY OPTIONS menu,
select 6 to change the position of the
ID display. Use ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ to position the
camera ID, then select Enter when done.
5.2.7
Change Sector Name Location
From the DISPLAY OPTIONS menu,
select 7 to change the position of the
Sector ID title display. Use ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ to
position the Sector ID, then select Enter
when done.
5.2.8
Crosshairs
From the DISPLAY OPTIONS menu, select 8 to display crosshairs on the display.
This is useful when using Pan Offset.
Rev. D
---- UltraDome KD6i ----
Protocol
9600 baud even parity-8 bits
Camera
Honeywell Video Systems
Please wait . . . 15
X
Use ↑↓ keys to position the
Name. Hit 'Enter' when done.
********Sector********
Use ↑↓ keys to position the
Name. Hit 'Enter' when done.
23
Standard
FDB-EX48B
519543-1980
Please wait. . . 8
Cam nnn
KDMU000799
02/6/04
Advertisement
Table of Contents
