Table of Contents
Advertisement
Honeywell 60 Series IP Camera Software Configuration Guide
Figure 2-4 Splash Screen
1. Select your language from the dropdown list of Language. Currently, only English is
supported.
2. Check "Don't show the splash window on startup" and this page can be skipped next time.
If you want to check the splash window again, click
the checkbox of Show the splash page on startup.
3. Click CONTINUE. It will scan devices in the network automatically.
Figure 2-5 Scanning the network
After the scanning, all scanned devices in the same subnet and different subnet will be
displayed in the devices list.
6
as shown in
Figure 3-3
and select
Advertisement
Table of Contents
