Yamaha WR450F(T) Owner's Service Manual page 612

STEERING
9. Install:
• Steering shaft cap 1
10. After tightening the nut, check the steering
for smooth movement. If not, adjust the
steering by loosening the ring nut little by
little.
11. Adjust:
• Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
12. Tighten:
• Pinch bolt (handle crown) 1
• Pinch bolt (under bracket) 2
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
13. Install:
• Trip meter 1
• Bolt (trip meter) 2
NOTE:
Install the trip meter over the coupler bracket
3.
5 - 51
CHAS
23 Nm (2.3 m · kg, 17 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)