Yamaha WR450F(T) Owner's Service Manual page 170

1 Throttle cable
2 Clamp
3 Brake hose
4 Hot starter cable
5 Clutch cable
6 Hose guide
7 Clutch switch lead
8 "ENGINE STOP" button lead
9 Trip meter cable
0 Main switch lead
A Trip meter
B Main switch
C Start switch lead
CABLE ROUTING DIAGRAM
È Fasten the start switch lead to
the handlebar with the plastic
bands.
É Fasten the "ENGINE STOP"
button lead and clutch switch
lead to the handlebar with the
plastic bands.
Ê Pass the brake hose through
the hose guides.
Ë Pass the start switch lead in
front of the main switch lead.
Ì Pass the hot starter cable
between the handle crown and
coupler bracket.
2 - 28
SPEC
Í Pass the throttle cables and
clutch cable between the han-
dle crown and trip meter.