Hp Sum Fails On Windows Hosts Due To Mcafee Firewalls - HP Integrity Superdome 2 16-socket User Manual

Hp smart update manager 5.1 user guide

Hide thumbs Also See for Integrity Superdome 2 16-socket:

Table of Contents

returned. HP SUM cannot determine which source RPMs go with which distribution because the

RPMs do not contain any operating system information.

To resolve this issue, ensure that you select the bundle for the operating system distribution on the

Select Bundle screen for installation or remove the RPMs from the directory that are not applicable

to the Linux distribution you are using.

HP SUM fails on Windows hosts due to McAfee firewalls

This is a known issue with McAfee that McAfee firewalls block HP SUM traffic.

To resolve this issue, enable the port traffic associated with the HP SUM application by performing

the following steps:

From the system tray, click the McAfee icon.

Select Manage Features.

Select McAfee Host Intrusion Prevention.

Select the Activity Log tab.

As displayed in the following image, in the Message column, notice the entry similar to the

following: Blocked Incoming TCP from the HOST (15.255.101.110) during

execution of HP SUM.

From the menu, select Task Unlock Interface.

Enter the password of the McAfee user interface.

Select the Firewall Policy tab.

On the bottom of the screen, click Add (Add new rule).

From the screen image, use the following settings for the new firewall rules on your system.

Troubleshooting

Table of Contents