Display Interface Loopback - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
text: Creates an interface description, a string of 1 to 80 characters. Valid characters and symbols
include English letters (A to Z, a to z), digits (0 to 9), special English characters, spaces, and other
Unicode characters and symbols.
Description
Use description to set a description for the interface.
Use undo description to restore the default.
By default, the description of a loopback or null interface is interface name Interface. For example:
Loopback0 interface.
An interface description can be a mixture of English characters and other Unicode characters. The mixed
description cannot exceed the specified length.
To use a type of Unicode characters or symbols in an interface description, you must install the
corresponding Input Method Editor (IME) and log in to the device through supported remote login
software.
Each non-English Unicode character or symbol takes the space of two regular characters. When the
length of a description string reaches or exceeds the maximum line width on the terminal software, the
software starts a new line. If a line is broken, it may break a Unicode character into two parts and create
garbled characters.
Related commands: display interface.
Examples
# Set the description for interface loopback 0 to loopback0.
<Sysname> system-view
[Sysname] interface loopback 0
[Sysname-loopback0] description loopback0

display interface loopback

Syntax
display interface [ loopback ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface loopback interface-number [ brief ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-number: Loopback interface number, which can be the number of any existing loopback
interface. With this argument, this command displays information about a specified loopback interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
50