Lldp Hold-Multiplier - HP 12500 Series Command Reference Manual
Routing, layer 2 - lan switching
Hide thumbs
Also See for 12500 Series:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable
undo lldp global enable
Default
LLDP is globally disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
LLDP takes effect only when LLDP is enabled both globally and on the port.
Examples
# Disable LLDP globally.
<Sysname> system-view
[Sysname] undo lldp global enable
Related commands
lldp enable
lldp hold-multiplier
Use lldp hold-multiplier to set the TTL multiplier.
Use undo lldp hold-multiplier to restore the default.
Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
Default
The TTL multiplier is 4.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
140
Advertisement
Table of Contents
