Stp Priority - HP 12500 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
all: Specifies all MSTIs.
instance instance-list: Specifies the MSTIs by an instance list, in the format of instance-list =
{ instance-id [ to instance-id ] }&<1-10>, where &<1-10> indicates that you can specify up to 10
instances or instance ranges. The instance-id argument is in the range of 0 to 4094, and the value 0
represents the CIST.
Examples
# In MSTP mode, enable outputting port state transition information for MSTI 2.
<Sysname> system-view
[Sysname] stp port-log instance 2
%Aug 16
GigabitEthernet3/0/1 has been set to discarding state.
%Aug 16
GigabitEthernet3/0/2 has been set to forwarding state.
The output shows that GigabitEthernet 3/0/1 in MSTI 2 transitioned to the discarding state and
GigabitEthernet 3/0/2 in MSTI 2 transitioned to the forwarding state.

stp priority

Use stp priority to set the priority of the device.
Use undo stp priority to restore the default priority.
Syntax
stp [ instance instance-list ] priority priority
undo stp [ instance instance-list ] priority
Default
The device priority is 32768.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
instance instance-list: Sets the priority of the device in the MSTIs that are specified by an instance
list, in the format of instance-list = { instance-id [ to instance-id ] }&<1-10>, where &<1-10>
indicates that you can specify up to 10 instances or instance ranges. The instance-id argument is in
the range of 0 to 4094, and the value 0 represents the CIST.
priority: Specifies the device priority in the range of 0 to 61440 in increments of 4096 (as in 0, 4096,
8192). You can set up to 16 priority values on the device. The smaller the value, the higher the
device priority.
00:49:41:856 2011
00:49:41:856 2011
Sysname MSTP/3/MSTP_DISCARDING:
Sysname MSTP/3/MSTP_FORWARDING:
77
Instance 2's port
Instance 2's port