Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Figure 10-13. Example of Displaying the Current MDI Configuration
Figure 10-14. Example of Displaying the Current MDI Operating Mode
Web: Viewing Port Status and Configuring Port
Parameters
In the web browser interface:
1.
2.
3.
4.
Note that the web browser interface displays an existing port trunk group.
However, to configure a port trunk group, you must use the CLI or the menu
interface. For more on this topic, refer to Chapter 11, "Port Trunking" .
10-22
Click on the Configuration tab.
Click on
[Port Configuration]
Select the ports you want to modify and click on
After you make the desired changes, click on
.
[Apply Settings]
Per-Port MDI
Configuration
Per-Port MDI
Operating Mode
[Modify Selected Ports]
.
.