NETGEAR ProSAFE M7100-24X Reference Manual page 207

ProSAFE M7100 Managed Switches
Term Definition
Priority The priority value for the specific virtual router, taking into account any priority decrements
for tracked interfaces or routes.
Configured The priority configured through the ip vrrp <vrid> priority <1-254> command.
Priority
Advertisement The advertisement interval in seconds for the specific virtual router.
interval
Pre-Empt Mode The preemption mode configured on the specified virtual router.
Administrative The status (Enable or Disable) of the specific router.
Mode
State The state (Master/backup) of the virtual router.
The following shows example CLI display output for the command.
(Switch)#show ip vrrp interface 0/1 1
Primary IP Address............................. 1.1.1.5
VMAC Address................................... 00:00:5e:00:01:01
Authentication Type............................ None
Priority....................................... 100
Configured priority.......................... 100
Advertisement Interval (secs).................. 1
Pre-empt Mode.................................. Enable
Administrative Mode............................ Disable
Accept Mode.................................... Enable
State.......................................... Initialized
Track Interface State
--------------- ------ ------------------
<0/1> down
TrackRoute (pfx/len)
------------------------ ------ ------------------
10.10.10.1/255.255.255.0 down
show ip vrrp interface
This command displays information about each virtual router configured on the switch. This
command takes no options. It displays information about each virtual router.
Format
show ip vrrp interface brief
Modes • Privileged EXEC
• User EXEC
DecrementPriority
10
State DecrementPriority
10
Routing Commands
207