NETGEAR ProSAFE M7100-24X Reference Manual page 602

ProSAFE M7100 Managed Switches
Table 32. GARP/GVRP/GMRP Log Messages
Component Message
GARP/GVRP/ garpMapIntfIsConfigurable,
gmrpMapIntfIsConfigurable: Error accessing
GMRP
GARP/GMRP config data for interface %d in
garpMapIntfIsConfigurable.
GARP/GVRP/ garpTraceMsgQueueUsage: garpQueue
usage has exceeded fifty/eighty/ninety
GMRP
percent
GARP/GVRP/ gid_destroy_port: Error Removing port %d
registration for vlan-mac %d -
GMRP
%02X:%02X:%02X:%02X:%02X:%02X
GARP/GVRP/ gmd_create_entry: GMRP failure adding
MFDB entry: vlan %d and address %s
GMRP
Table 33. 802.3ad Log Messages
Component Message
802.3ad dot3adReceiveMachine: received default
event %x
802.3ad dot3adNimEventCompletionCallback,
dot3adNimEventCreateCompletionCallback:
DOT3AD: notification failed for event(%d),
intf(%d), reason(%d)
Table 34. FDB Log Message
Component Message
FDB fdbSetAddressAgingTimeOut: Failure setting
fid %d address aging timeout to %d
Table 35. Double VLAN Tag Log Message
Component Message
Double Vlan Tag dvlantagIntfIsConfigurable: Error accessing
dvlantag config data for interface %d
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
pre-configuration.
Traces the buildup of message queue. Helpful
in determining the load on GARP.
Mismatch between the gmd (gmrp database)
and MFDB.
MFDB table is full.
Cause
Received a LAG PDU and the RX state
machine is ignoring this LAGPDU
The event sent to NIM was not completed
successfully
Cause
Unable to set the age time in the hardware
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
pre-configuration.
Log Messages
602