NETGEAR ProSAFE M7100-24X Reference Manual page 598

ProSAFE M7100 Managed Switches
Table 25. SSLT Log Messages
Component Message
SSLT SSLT: Can't connect to unsecure server at
XXXX, result = YYYY, errno = ZZZZ
SSLT SSLT: Msg Queue is full, event=XXXX
SSLT SSLT: Unknown UI event in message, event=
XXXX
SSLT ssltApiCnfgrCommand: Failed calling
ssltIssueCmd.
SSLT SSLT: Error loading certificate from file XXXX Failed while loading the SSLcertificate from
SSLT SSLT: Error loading private key from file
SSLT SSLT: Error setting cipher list (no valid
ciphers)
SSLT SSLT: Could not delete the SSL semaphores
Table 26. User_Manager Log Messages
Component Message
User_Manager User Login Failed for XXXX
User_Manager Access level for user XXXX could not be
determined. Setting to READ_ONLY.
User_Manager Could not migrate config file XXXX from
version YYYY to ZZZZ. Using defaults.
Cause
Failed to open connection to unsecure server.
XXXX is the unsecure server socket address.
YYYY is the result returned from connect
function and ZZZZ is the error code.
Failed to send the received message to the
SSLT message queue as message queue is full.
XXXX indicates the event to be sent.
Failed to dispatch the received UI event to
the appropriate SSLT function as it's an
invalid event. XXXX indicates the event to be
dispatched.
Failed to send the message to the SSLT
message queue.
specified file. XXXX indicates the file from
where the certificate is being read.
Failed while loading private key for SSL
connection.
Failed while setting cipher list.
Failed to delete SSL semaphores during
cleanup.of all resources associated with the
OpenSSL Locking semaphores.
Cause
Failed to authenticate user login. XXXX
indicates the user name to be authenticated.
Invalid access level specified for the user. The
access level is set to READ_ONLY. XXXX
indicates the user name.
Failed to migrate the config file. XXXX is the
config file name. YYYY is the old version
number and ZZZZ is the new version number.
Log Messages
598