NETGEAR ProSAFE M7100-24X Reference Manual page 593

ProSAFE M7100 Managed Switches
Table 13. DHCP Filtering Log Messages
Component Message
DHCP Filtering Unable to create r/w lock for DHCP Filtering
DHCP Filtering Failed to register with nv Store.
DHCP Filtering Failed to register with NIM
DHCP Filtering Error on call to sysapiCfgFileWrite file
Table 14. NVStore Log Messages
Component Message
NVStore Building defaults for file XXX
NVStore Error on call to osapiFsWrite routine on file
XXX
NVStore File XXX corrupted from file system.
Checksum mismatch.
NVStore Migrating config file XXX from version Y to Z A configuration file version mismatch was
Table 15. RADIUS Log Messages
Component Message
RADIUS RADIUS: Invalid data length - xxx
RADIUS RADIUS: Failed to send the request
RADIUS RADIUS: Failed to send all of the request
RADIUS RADIUS: Could not get the Task Sync
semaphore!
RADIUS RADIUS: Buffer is too small for response
processing
Cause
Unable to create semaphore used for dhcp
filtering configuration structure .
Unable to register save and restore functions
for configuration save
Unable to register with NIM for interface
callback functions
Error on trying to save configuration .
Cause
A component's configuration file does not
exist or the file's checksum is incorrect so the
component's default configuration file is
built.
Either the file cannot be opened or the OS's
file I/O returned an error trying to write to
the file.
The calculated checksum of a component's
configuration file in the file system did not
match the checksum of the file in memory.
detected so a configuration file migration has
started.
Cause
The RADIUS Client received an invalid
message from the server.
A problem communicating with the RADIUS
server.
A problem communicating with the RADIUS
server during transmit.
Resource issue with RADIUS Client service.
RADIUS Client attempted to build a response
larger than resources allow.
Log Messages
593