NETGEAR ProSAFE M7100-24X Reference Manual page 302

ProSAFE M7100 Managed Switches
Term Definition
Reauthentication Indicates if reauthentication is enabled on this port. Possible values are 'True" or "False".
Enabled
Key Transmission Indicates if the key is transmitted to the supplicant for the specified port. Possible values
Enabled are True or False.
Control Direction The control direction for the specified port or ports. Possible values are both or in.
Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based
dot1x authentication mode. This value is used only when the port control mode is not
MAC-based.
Unauthenticated Indicates the unauthenticated VLAN configured for this port. This value is valid for the port
VLAN ID only when the port control mode is not MAC-based.
Session Timeout Indicates the time for which the given session is valid. The time period in seconds is returned
by the RADIUS server on authentication of the port. This value is valid for the port only
when the port control mode is not MAC-based.
Session This value indicates the action to be taken once the session timeout expires. Possible values
Termination Action are Default, Radius-Request. If the value is Default, the session is terminated the port goes
into unauthorized state. If the value is Radius-Request, a reauthentication of the client
authenticated on the port is performed. This value is valid for the port only when the port
control mode is not MAC-based.
The
show dot1x detail <slot/port>
fields if the port-control mode for that specific port is MAC-based. For each client authenticated
on the port, the
show dot1x detail <slot/port>
MAC-based dot1x parameters if the port-control mode for that specific port is MAC-based.
Term Definition
Supplicant The MAC-address of the supplicant.
MAC-Address
Authenticator Current state of the authenticator PAE state machine. Possible values are Initialize,
PAE State Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized,
and ForceUnauthorized.
Backend Current state of the backend authentication state machine. Possible values are Request,
Authentication Response, Success, Fail, Timeout, Idle, and Initialize.
State
VLAN-Assigned The VLAN assigned to the client by the radius server.
Logical Port The logical port number associated with the client.
command will display the following MAC-based dot1x
command will display the following
Security Commands
302