ProSAFE M7100 Managed Switches
Term
Definition
Admin Mode
Enabled or disabled. The factory default is enabled.
Port Channel Flap
The number of times the port-channel was inactive.
Count
Mbr Ports
The slot/port for the port member.
Mbr Flap
The number of times a port member is inactive, either because the link is down, or because
Counters
the admin state is disabled.
The following CLI output is an example of the command output.
(Netgear Switch) #show port-channel 0/3/1 counters
Local Interface................................ 3/1 Channel
Name........................................... ch1 Link
State........................................... Down Admin
Mode............................................ Enabled Port Channel Flap
Count........................ 0
Mbr
Mbr
Flap
Ports Counters
------
---------
0/1
0
0/2
0
0/3
1
0/4
0
0/5
0
0/6
0
0/7
0
0/8
0
show port-channel system priority
Use this command to display the port-channel system priority.
Default
enabled
Format
show port-channel system priority
Mode
Privileged EXEC
Switching Commands
91