NETGEAR ProSAFE M7100-24X Reference Manual page 604

ProSAFE M7100 Managed Switches
Table 39. 802.1S Log Messages
Component Message
802.1S dot1sIssueCmd: Dot1s Msg Queue is
full!!!!Event: %u, on interface: %u, for
instance: %u
802.1S dot1sStateMachineRxBpdu(): Rcvd BPDU
Discarded
802.1S dot1sBpduTransmit(): could not get a buffer
Table 40. Port Mac Locking Log Message
Component Message
Port Mac Locking pmlMapIntfIsConfigurable: Error accessing
PML config data for interface %d in
pmlMapIntfIsConfigurable.
Table 41. Protocol-based VLANs Log Messages
Component Message
Protocol Based pbVlanCnfgrInitPhase2Process: Unable to
VLANs register NIM callback
Protocol Based pbVlanCnfgrInitPhase2Process: Unable to
VLANs register pbVlan callback with vlans
Protocol Based pbVlanCnfgrInitPhase2Process: Unable to
VLANs register pbVlan callback with nvStore
Cause
The message Queue is full.
The current conditions, like port is not
enabled or we are currently not finished
processing another BPDU on the same
interface, does not allow us to process this
BPDU
Out of system buffers
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no
pre-configuration.
Cause
Appears when nimRegisterIntfChange fails to
register pbVlan for link state changes.
Appears when vlanRegisterForChange fails to
register pbVlan for vlan changes.
Appears when nvStoreRegister fails to
register save and restore functions for
configuration save.
Log Messages
604