NETGEAR ProSAFE M7100-24X Reference Manual page 601

ProSAFE M7100 Managed Switches
Table 30. 802.1x Log Messages
Component Message
802.1X dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed
802.1X dot1xRadiusAcceptProcess: error calling
radiusAccountingStart, ifIndex=xxx
802.1X function: failed sending terminate cause, intf
xxx
Table 31. IGMP Snooping Log Messages
Component Message
IGMP Snooping function: osapiMessageSend failed
IGMP Snooping Failed to set global igmp snooping mode to
xxx
IGMP Snooping Failed to set igmp snooping mode xxx for
interface yyy
IGMP Snooping Failed to set igmp mrouter mode xxx for
interface yyy
IGMP Snooping Failed to set igmp snooping mode xxx for
VLAN yyy
IGMP Snooping Failed to set igmp mrouter mode %d for
interface xxx on VLAN yyy
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating small buffers
IGMP Snooping snoopCnfgrInitPhase1Process: Error
allocating large buffers
Table 32. GARP/GVRP/GMRP Log Messages
Component Message
GARP/GVRP/ garpSpanState, garpIfStateChange,
GarpIssueCmd, garpDot1sChangeCallBack,
GMRP
garpApiCnfgrCommand,
garpLeaveAllTimerCallback,
garpTimerCallback: QUEUE SEND FAILURE:
GARP/GVRP/ GarpSendPDU: QUEUE SEND FAILURE
GMRP
Cause
Failed sending message to RADIUS server
Failed sending accounting start to RADIUS
server
Failed sending accounting stop to RADIUS
server
Cause
IGMP Snooping message queue is full
Failed to set global IGMP Snooping mode due
to message queue being full
Failed to set interface IGMP Snooping mode
due to message queue being full
Failed to set interface multicast router mode
due to IGMP Snooping message queue being
full
Failed to set VLAN IGM Snooping mode due
to message queue being full
Failed to set VLAN multicast router mode due
to IGMP Snooping message queue being full
Could not allocate buffers for small IGMP
packets
Could not allocate buffers for large IGMP
packets
Cause
The garpQueue is full, logs specifics of the
message content like internal interface
number, type of message, and so on.
The garpPduQueue is full, logs specific of the
GPDU, internal interface number, VLAN id,
buffer handle, and so on.
Log Messages
601