Table of Contents
Advertisement
ProSAFE M7100 Managed Switches
Table 5. CLI Command Modes (continued)
Command Mode
Prompt
ARP Access-List
Switch (Config-arp-access-list)#
Config Mode
VPC Domain Config
Switch (Config-VPC 1)#
Mode
Table 6
explains how to enter or exit each mode.
Table 6. CLI Mode Access and Exit
Command Mode
Access Method
User EXEC
This is the first level of access.
Privileged EXEC
From the User EXEC mode, enter
enable.
Global Config
From the Privileged EXEC mode,
enter configure.
VLAN Config
From the Privileged EXEC mode,
enter vlan database.
Interface Config
From the Global Config mode, enter
interface <slot/port> or
interface loopback <id> or
interface tunnel <id>
Line Config
From the Global Config mode, enter
lineconfig.
Policy-Map
From the Global Config mode, enter
Config
policy-map <name>.
Policy-Class-Map
From the Policy Map mode enter
Config
class.
Class-Map
From the Global Config mode, enter
Config
class-map, and specify the
optional keyword ipv4 to specify
the Layer 3 protocol for this class.
See
information.
Ipv6-Class-Map
From the Global Config mode, enter
Config
class-map and specify the
optional keyword ipv6 to specify
the Layer 3 protocol for this class.
See
information.
MAC Access-list
From the Global Config mode, enter
Config
mac access-list extended
<name>.
class-map
on page 228 for more
class-map
on page 228 for more
Use the Command-Line Interface
Mode Description
Contains commands to add ARP ACL rules in an
ARP Access List.
Contains the VPC domain configuration
commands.
Exit or Access Previous Mode
To exit, enter logout.
To exit to the User EXEC mode, enter exit or press
Ctrl-Z.
To exit to the Privileged EXEC mode, enter exit, or
press Ctrl-Z.
To exit to the Privileged EXEC mode, enter exit or
press Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-ZZ.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
To exit to the Policy Map mode, enter exit. To return
to the Privileged EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode, enter exitt. To
return to the Privileged EXEC mode, enter Ctrl-ZZ.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-Z.
14
Hide quick links:
Advertisement
Chapters
Table of Contents
