NETGEAR ProSAFE M7100-24X Reference Manual page 377

Prosafe m7100 managed switches command-line interface (cli) reference manual
Hide thumbs Also See for ProSAFE M7100-24X:
Table of Contents

Advertisement

ProSAFE M7100 Managed Switches
Term
Definition
Transmit Discards
• Total Transmit Packets Discards - The sum of single collision frames discarded, multiple
• Single Collision Frames - A count of the number of successfully transmitted frames on a
• Multiple Collision Frames - A count of the number of successfully transmitted frames on a
• Excessive Collisions - A count of frames for which transmission on a particular interface
• Port Membership Discards - The number of frames discarded on egress for this port due to
Protocol Statistics • 802.3x Pause Frames Transmitted - A count of MAC Control frames transmitted on this
• GVRP PDUs Received - The count of GVRP PDUs received in the GARP layer.
• GVRP PDUs Transmitted - The count of GVRP PDUs transmitted from the GARP layer.
• GVRP Failed Registrations - The number of times attempted GVRP registrations could not
• GMRP PDUs Received - The count of GMRP PDUs received in the GARP layer.
• GMRP PDUs Transmitted - The count of GMRP PDUs transmitted from the GARP layer.
• GMRP Failed Registrations - The number of times attempted GMRP registrations could not
• STP BPDUs Transmitted - Spanning Tree Protocol Bridge Protocol Data Units sent.
• STP BPDUs Received - Spanning Tree Protocol Bridge Protocol Data Units received.
• RST BPDUs Transmitted - Rapid Spanning Tree Protocol Bridge Protocol Data Units sent.
• RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
• MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol Bridge Protocol Data Units
• MSTP BPDUs Received - Multiple Spanning Tree Protocol Bridge Protocol Data Units
• EAPOL Frames Transmitted - The number of EAPOL frames of any type that have been
Dot1x Statistics
• EAPOL Frames Received - The number of valid EAPOL frames of any type that have been
Time Since
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were
Counters Last
last cleared.
Cleared
If you use the switchport keyword, the following information appears.
Term
Definition
Octets Received
The total number of octets of data received by the processor (excluding framing bits but
including FCS octets).
The total number of packets (including broadcast packets and multicast packets) received by
Total Packets
Received Without
the processor.
Error
collision frames discarded, and excessive frames discarded.
particular interface for which transmission is inhibited by exactly one collision.
particular interface for which transmission is inhibited by more than one collision.
fails due to excessive collisions.
egress filtering being enabled.
interface with an opcode indicating the PAUSE operation. This counter does not increment
when the interface is operating in half-duplex mode.
be completed.
be completed.
sent.
received.
transmitted by this authenticator.
received by this authenticator.
Utility Commands
377

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe m7100 series

Table of Contents