NETGEAR ProSAFE M7100-24X Reference Manual page 374

Prosafe m7100 managed switches command-line interface (cli) reference manual
Hide thumbs Also See for ProSAFE M7100-24X:
Table of Contents

Advertisement

ProSAFE M7100 Managed Switches
Term
Definition
(continued)
• Packets Received 512–1023 Octets - The total number of packets (including bad
• Packets Received 1024–1518 Octets - The total number of packets (including bad
• Packets Received > 1518 Octets - The total number of packets received that were longer
• Packets RX and TX 64 Octets - The total number of packets (including bad packets)
• Packets RX and TX 65–127 Octets - The total number of packets (including bad packets)
• Packets RX and TX 128–255 Octets - The total number of packets (including bad packets)
• Packets RX and TX 256–511 Octets - The total number of packets (including bad packets)
• Packets RX and TX 512–1023 Octets - The total number of packets (including bad
• Packets RX and TX 1024–1518 Octets - The total number of packets (including bad
• Packets RX and TX 1519–1522 Octets - The total number of packets (including bad
• Packets RX and TX 1523–2047 Octets - The total number of packets received and
• Packets RX and TX 2048–4095 Octets - The total number of packets received that were
• Packets RX and TX 4096–9216 Octets - The total number of packets received that were
Packets Received
• Total Packets Received Without Error - The total number of packets received that were
Successfully
• Unicast Packets Received - The number of subnetwork-unicast packets delivered to a
• Multicast Packets Received - The total number of good packets received that were
• Broadcast Packets Received - The total number of good packets received that were
packets) received that were from 512 through 1023 octets in length inclusive (excluding
framing bits but including FCS octets).
packets) received that were from 1024 through 1518 octets in length inclusive (excluding
framing bits but including FCS octets).
than 1522 octets (excluding framing bits, but including FCS octets) and were otherwise well
formed.
received and transmitted that were 64 octets in length (excluding framing bits but including
FCS octets).
received and transmitted that were from 65 through 127 octets in length inclusive
(excluding framing bits but including FCS octets).
received and transmitted that were from 128 through 255 octets in length inclusive
(excluding framing bits but including FCS octets).
received and transmitted that were from 256 through 511 octets in length inclusive
(excluding framing bits but including FCS octets).
packets) received and transmitted that were from 512 through 1023 octets in length
inclusive (excluding framing bits but including FCS octets).
packets) received and transmitted that were from 1024 through 1518 octets in length
inclusive (excluding framing bits but including FCS octets).
packets) received and transmitted that were from 1519 through 1522 octets in length
inclusive (excluding framing bits but including FCS octets).
transmitted that were from 1523 through 2047 octets in length inclusive (excluding
framing bits, but including FCS octets) and were otherwise well formed.
from 2048 through 4095 octets in length inclusive (excluding framing bits, but including
FCS octets) and were otherwise well formed.
from 4096 through 9216 octets in length inclusive (excluding framing bits, but including
FCS octets) and were otherwise well formed.
without errors.
higher-layer protocol.
directed to a multicast address. Note that this number does not include packets directed to
the broadcast address.
directed to the broadcast address. Note that this does not include multicast packets.
Utility Commands
374

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe m7100 series

Table of Contents