Xfp Port Cabling Specifications - Cisco ASR-1000-SIP10 Hardware Installation Manual

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers Shared Port Adapters
Table 3-14
Specification
RX overload
Maximum receiver power damage

XFP Port Cabling Specifications

Table 3-15
Table 3-15
XFP Module
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192LR
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Gigabit Ethernet SPA:
•
•
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and one
STATUS LED, as shown in
Figure 3-17
1
Table 3-16
OL-14126-03
XFP Module Specifications for the 1-Port 10-Gigabit Ethernet SPA (continued)
shows the port cabling specifications for an XFP module.
XFP Port Cabling Specifications
Wavelength
1310 nm
1550 nm
1550 nm
2-Port Gigabit Ethernet SPA LEDs, page 3-19
2-Port Gigabit Ethernet SPA Cables, Connectors, and Pinouts, page 3-20
Figure
2-Port Gigabit Ethernet SPA Faceplate
A/L (Active/Link) LED
describes the 2-Port Gigabit Ethernet SPA LEDs.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
Description
10GLR SR-1: 0.5 dBm
10GER IR-2: –1.0 dBm
10GZR LR-2: –7.0 dBm
10GLR SR-1: 5 dBm
10GER IR-2: 5 dBm
10GZR LR-2: 5 dBm
Fiber Type
SMF
SMF
SMF
3-17.
1
STATUS LED
2
2-Port Gigabit Ethernet SPA Overview
SPA-2X1GE-V2
2
3-19