Sip And Spa Compatibility; Modular Optics Compatibility - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual

Carrier routing system sip and spa
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

Chapter 1
SIP and SPA Product Overview

SIP and SPA Compatibility

Table 1-1
For more information about the introduction of support for different SIPs and SPAs, refer to
Note
Cisco IOS XR Interface and Hardware Component Configuration Guide.
Table 1-1
SPA
1-Port Clear Channel OC-3 ATM SPA
3-Port Clear Channel OC-3 ATM SPA
1-Port Clear Channel OC-12 ATM SPA
4-Port OC-3c/STM-1 POS SPA
8-Port OC-12c/STM-4 Multirate POS SPA
2-Port OC-48c/STM-16 POS/RPR SPA
4-Port OC-48c/STM-16 POS/RPR SPA
1-Port OC-192c/STM-64 POS/RPR XFP SPA
1-Port OC-192c/STM-64 POS/RPR VSR Optics SPA SPA-OC192POS-VSR
5-Port Gigabit Ethernet SPA
8-Port Gigabit Ethernet SPA
10-Port Gigabit Ethernet SPA
1-Port 10-Gigabit Ethernet SPA
2-Port Clear Channel T3/E3 SPA
4-Port Clear Channel T3/E3 SPA

Modular Optics Compatibility

Some SPAs implement small form-factor pluggable (SFP or XFP
network connectivity. An SFP module is a fiber-optic transceiver device that mounts in the front panel
to provide network connectivity.
Cisco Systems qualifies the SFP modules that can be used with SPAs.
1. SFP modules are optics modules with speeds lower than 10 Gbps; XFP modules are optics modules with speeds
equal to or greater than 10 Gbps.
OL-17439-01
Either a blank filler plate (SPA-BLANK=) or a functional SPA should reside in every subslot of a
SIP during normal operation to maintain cooling integrity. Blank filler plates are available in
single-height form only.
SPAs support online insertion and removal (OIR). They can be inserted or removed independently
from the SIP. SIPs also support OIR.
shows the SIP that is supported in the Cisco CRS-1 router and the SPAs that it supports.
SIP and SPA Compatibility
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
SIP and SPA Compatibility
Cisco Part Number
SPA-1XOC3-ATM-V2
SPA-3XOC3-ATM-V2
SPA-1XOC12-ATM-V2
SPA-4XOC3-POS
SPA-8XOC12-POS
SPA-2XOC48POS/RPR
SPA-4XOC48POS/RPR
SPA-OC192POS-XFP
SPA-5X1GE-V2
SPA-8X1GE,
SPA-8X1GE-V2
SPA-10X1GE-V2
SPA-1X10GE-L-V2
SPA-1X10GE-WL-V2
SPA-2XT3E3
SPA-4XT3E3
1
) optical transceivers to provide
Cisco CRS-1 SIP-800
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1-3

Advertisement

Table of Contents
loading

Table of Contents