Configuring Access Node Control Protocol On Cisco Asr 9000 Series Routers; Contents - Cisco ASR 9000 Series Service Configuration Manual

Configuring Access Node Control Protocol
on Cisco ASR 9000 Series Routers
Access Node Control Protocol (ANCP) creates a control plane between a service-oriented aggregation
device and an access node (AN) (for example, a DSLAM) in order to perform QoS-related,
service-related, and subscriber-related operations. An ANCP server accepts and maintains ANCP
adjacencies (sessions with an ANCP neighbor), and sending and receiving ANCP messages. ANCP
allows static mapping between ANCP ports and VLAN subinterfaces so that DSL rate updates for a
specific subscriber received by the ANCP server are applied to the QoS configuration corresponding to
that subscriber. DSL train rates received via ANCP are used to alter shaping rates on subscriber-facing
interfaces and subinterfaces on the router. ANCP runs as a single process on the route processor (RP).
This module provides the conceptual and configuration information for implementing ANCP.
Line Card, SIP, and SPA Support
Feature
Access Node Control Protocol
Feature History for Configuring Access Node Protocol on Cisco ASR 9000 Series Routerss
Release
Release 3.7.2
Release 3.9.0
Release 4.0.0

Contents

•
•
•
•
•
•
OL-23108-02
Modification
The Access Node Control Protocol feature was introduced.
Mapping of ANCP ports to VLAN interfaces over Ethernet bundles was
added.
ANCP over Multi Chassis Link Aggregation was introduced.
Prerequisites for Configuring ANCP on Cisco ASR 9000 Series Routers, page 90
Restrictions for Configuring ANCP on Cisco ASR 9000 Series Routers, page 90
Information About Configuring ANCP on Cisco ASR 9000 Series Routers, page 90
How to Configure ANCP on Cisco ASR 9000 Series Routers, page 94
Configuration Examples for Configuring ANCP on Cisco ASR 9000 Series Routers, page 104
Additional References, page 120
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
ASR 9000 Ethernet Line Cards
yes
SIP 700 for the ASR 9000
no
QC-89