Table of Contents
Advertisement
30
en | Connection via the web browser
7
Connection via the web browser
A computer with a web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox) is used
to receive live images, control the unit, and replay stored sequences. The unit is configured
over the network using the browser.
7.1
System requirements
Our recommendations are:
–
–
–
–
–
7.2
Establishing the connection
The unit must have a valid IP address and a compatible subnet mask to operate on your
network. By default, DHCP is pre-set at the factory to On and so your DHCP server assigns
an IP address. With no DHCP server the default address is automatically assigned via link-
local address.
The Project Assistant app or Configuration Manager (version 7.60 or higher) can be used to
find the IP address. Download the software from https://downloadstore.boschsecurity.com:
1.
2.
3.
If a RADIUS server is used for network access control (802.1x authentication), you must
configure the device before the device can communicate with the network.
To configure the device, connect it directly to a computer using a network cable and then
set the service-level password.
Note:
If you cannot connect, the unit may have reached its maximum number of connections.
Depending on the device and network configuration, each unit can have up to 50 web
browser connections, or up to 100 connections via BVMS.
7.3
Password protection in camera
The device is password-protected. The first time that any user accesses the device, the
device will prompt the user to set a password at the service level.
The camera requires a strong password. Follow the prompts in the dialog box, which
specifies what is required. The system measures the strength of the password that you
enter.
When you use Configuration Manager to access your device for the first time, you must set
the initial password of the device in Configuration Manager. The Users section (General >
Unit Access > Users) displays the message, "Before you can use this device you have to
secure it with an initial password."
Note: After you set the initial password, a "lock" icon appears next to the device name in the
Devices list in Configuration Manager.
You can also launch the device webpage directly. In the device webpage, an initial password
page appears, displaying input fields and a password strength gauge.
2023-08 | V02 | DOC
Computer with Dual core HyperThreading processor or better
Graphic card with performance that matches or is better than the resolution of the
camera
Windows 10 or later
Network access
Google Chrome, Microsoft Edge, or Mozilla Firefox
- or -
Application software, for example, Video Security Client or BVMS.
Start the web browser.
Enter the IP address of the device as the URL.
During the initial installation, confirm any security questions that show.
Installation manual
DINION 7100i IR
Bosch Security Systems B.V.
Advertisement
Table of Contents
