Power Connections To Heater (All Outdoor Models); Ethernet Connection (Ip Models) - Bosch VEZ-221-ECCE Installation Manual

AutoDome Easy II IP
8.2.3

Power Connections to Heater (all outdoor models)

Figure 8.3 Power Cable
Ref. # Wire
1
2
3
WARNING!
The heater unit accepts 24 VAC, 2 A power only. Do not connect
120 V or 230 V to this heater.
To connect the power to outdoor heaters:
1.
2.
3.
8.3

Ethernet Connection (IP models)

The AutoDome Easy II IP connects to a 10 Base-T/100 Base-TX
network either directly or via a hub. Both video and control are
transmitted over a standard TCP/IP network using the built-in
Web server. In addition, power can be supplied to indoor IP
camera models via the Ethernet cable compliant with the
Power-over-Ethernet (IEEE 802.3af) standard.
Refer to Section 11 Using the AutoDome Easy II IP, page 74, for
instructions on configuring an IP environment.
CAUTION!
Ethernet connections must be made to non-exposed (indoor)
networks only.
Bosch Security Systems, Inc.
24 VAC
24 VAC
User supplied Power Supply
Locate the cable assembly with a three (3) pin mating
connector on one end and the white/red and white/black
flying leads on the other end.
Connect one lead of the ground or 24 VAC power source to
the white/black wire.
Connect one lead of the 24 VAC power source to the
white/red wire.
Installation Manual
Preparing the Wiring | en
Color
White/Red
White/Black
n/a
F.01U.164.576 | 2.0 | 2010.03
67