Installing A Recessed Mount; Description; Additional Requirements - Bosch VCD Series Installation Manual

Hd conference dome
Table of Contents

Advertisement

HD Conference Dome
6

Installing a Recessed Mount

6.1

Description

This chapter details how to recess mount the HD Conference
Dome.
The HD Conference Dome is also suitable for surface
(Section 4 Installing a Surface Mount, page 22), wall
(Section 5 Installing a Wall Mount, page 28), and pipe mounting
(Section 7 Installing a Pipe Mount, page 44). For specific
directions on mounting the unit, see the manual that came with
your mount.
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
6.1.1

Additional Requirements

Bosch Security Systems, Inc.
Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
Avoid bright lights in the field of view of the camera. Bright
lights cause a "smearing" effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.
Appropriate straight slot screwdrivers
No. 2 Phillips screwdriver
Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
4 in. x 4 in. junction box (optional)
T-10 Torx wrench
VJR-A3-SP, support kit for VJR-A3-IC mounting kit
Installation Manual
Installing a Recessed Mount | en
F.01U.265.806 | 1.0 | 2012.03
35

Advertisement

Table of Contents
loading

Table of Contents