Recording Status; Recording Statistics; Image Posting - Bosch FLEXIDOME corner 7100i IR NCE-7703-FK User Manual

Hide thumbs Also See for FLEXIDOME corner 7100i IR NCE-7703-FK:
Table of Contents

Advertisement

FLEXIDOME corner 7100i IR
Click Set to apply the changes.
4.5.5

Recording Status

Details of the recording status are displayed here for information. These settings cannot be
changed.
4.5.6

Recording Statistics

The bit rate of the recorded video (blue) and other data (grey), such as audio and metadata,
are shown in the graphic.
Recording
Identifies the current recording profile (1 or 2).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
4.5.7

Image Posting

Save individual JPEG images on an FTP server at specific intervals.
JPEG
Image size
Select the size of the JPEG images that are to be sent from the camera. JPEG resolution
corresponds to the highest setting from the two data streams.
File name
Select how file names are created for the individual images that are transmitted.
VCA overlays
If you have enabled the display of VCA overlays on the Appearance page, select the VCA
overlays check box to have the overlays also visible in the JPEG image.
Posting interval
Enter the interval in seconds at which the images are sent to an FTP server. Enter zero for
no images to be sent.
Target
Select the target account for JPEG posting.
Notice!
i
You must configure an account in order to have functionality for Image Posting. Click on
Configure accounts to do so.
Click Set to apply the changes.
Bosch Security Systems
Overwrite: The same file name is always used and any existing file will be overwritten
by the current file.
Increment: A number from 000 to 255 is added to the file name and automatically
incremented by 1. When it reaches 255, it starts again from 000.
Date/time suffix: The date and time are automatically added to the file name. When
setting this parameter, make sure that the date and time of the device are always set
correctly. For example, the file snap011005_114530.jpg was stored on October 1, 2005
at 11:45 and 30 seconds.
User Manual
Configuration | en
2023-10 | V02 | F.01U.407.683
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexidome corner 7100i ir nce-7703-fk-gov

Table of Contents