Recording Status; Saving Snapshots; Recording Live Video; Full-Screen Display - Bosch AUTODOME IP 4000i User Manual

AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
The OSD displays the message, "Auto Focus: ONE PUSH."
Nightmode
Click this button to activate/deactivate night mode for the camera. After a few seconds, the
camera switches modes.
Custom tour
Click this button to view (in continuous playback) a custom tour that was previously
configured.
To stop a tour, click a directional control in the PTZ section of the page.
3.1.7

Recording status

The hard drive icon
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
3.1.8

Saving snapshots

Individual images from the displayed live video stream can be saved locally in JPEG format on
the computer's hard drive. The storage location depends on the configuration of the camera.
–
3.1.9

Recording live video

Video sequences from the displayed live video stream can be saved locally on the computer's
hard drive. The sequences are recorded at the resolution specified in the encoder
configuration. The storage location depends on the configuration of the camera.
1.
2.
3.1.10

Full-screen display

Click the full-screen icon
on the keyboard to return to the normal viewing window.
3.1.11

Audio communication

Audio can be sent and received via the Live page if the unit and the computer support audio.
1.
2.
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
3.1.12

Storage, CPU and network status

When accessing the unit with a browser, the local storage, processor and network status
icons are shown in the upper right of the window.
When a local storage card is available, the memory card icon changes color (green, orange or
red) to indicate the local storage activity. If you hover over this icon with the mouse the
storage activity is shown as a percentage.
Bosch Security Systems
below the live camera image changes during an automatic recording.
Click the photo camera icon
Click the recording icon
– Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
Click the recording icon again to stop recording.
Press and hold the F12 key on the keyboard to send an audio signal to the unit.
Release the key to stop sending audio.
to save a single image.
to record video sequences.
to view the selected stream in full-screen mode; press Esc
User Manual
Operation via the browser | en
2018.05 | 1.1 |
11