Operation Via The Browser Live Page; Pre-Positions; Aux Control; Special Functions - Bosch MIC inteox 7100i User Manual

62 en | Operation via the browser
13 Operation via the browser
13.1 Live page
13.1.1

Pre-positions

The camera displays Pre-position 1 through Pre-position 6. Select the appropriate pre-
position to view the video image for that pre-position/scene. In the lower left of the video
image, the OSD displays the Camera number (title), the Pre-position number, and the Pre-
position number stored.
Below the list of pre-positions/scenes is a drop-down list showing the stored pre-positions/
scenes.
Select the appropriate pre-position (1 through 6). Click
Note: If the pre-position is already stored, a dialog box displays the message, "Overwrite
current pre-position?" Click OK to overwrite, or click Cancel to cancel the operation.
Click
13.1.2

AUX Control

With the tab AUX Control you can enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show pre-
position, Set pre-position, AUX on, or AUX off). A valid combination either issues a command
to the device or displays an on-screen menu.
Show pre-position
Click this button to display a pre-position.
Set pre-position
Click this button to set a pre-position.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
13.1.3

Special Functions

Tour A / Tour B
Click one of these buttons to start the continuous playback of a recorded (guard) tour. A
recorded tour saves all manual camera movements made during the recording, including its
rate of pan, tilt and zoom speeds, and other lens setting changes.
To stop a tour, click a directional control in the View Control tab.
Focus
Click this button to activate the Auto Focus One Push mode on the camera.
The OSD displays the message, "Auto Focus: ONE PUSH."
13.1.4

Recording status

The hard drive icon
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
2022-01 | 1.13 |
to display the selected pre-position in the video image.
below the live camera image changes during an automatic recording.
User Manual
MIC inteox 7100i
to store the pre-position.
Bosch Security Systems