Table of Contents
Advertisement
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
16.1.3
Special Functions
LIVE page Special Functions
The camera offers special command buttons on the LIVE page.
Scan 360°
Click this button to start a continuous 360° pan. To stop the continuous pan, click a
directional control in the View Control tab.
Autopan
Click this button to pan the camera between user-defined limits. To set the left and right pan
limits, refer to PTZ Settings in the Operator Manual. To stop the continuous pan, click a
directional control in the View Control tab.
Tour A / Tour B
Click one of these buttons to start the playback of a recorded (guard) tour. A Recorded Tour
saves all manual camera movements made during the recording, including its rate of pan, tilt
and zoom speeds and other lens setting changes. To program a recorded tour, refer to PTZ
Settings. To stop a tour, click a directional control in the View Control tab.
Warning!
!
Save presets using One Push ("Spot Focus"). Refer to Lens Settings, page 60.
Find home
Click the Find home button to recalibrate the home position for the camera.
Show home
Click the Show home button to display the current home position.
Refocus
Click the Refocus button to issue the One Push focus command. One Push activates the Auto
Focus feature after the camera stops moving.
16.1.4
Digital I/O
The alarm icon is for information purposes and indicates the status of an alarm input: When an
alarm is triggered, the icon lights up blue. The device's configuration determines whether the
alarm is displayed, as well as additional details. Refer to the online help for more information.
Triggering Relay
You can switch connected units using the relays in the camera (for example, lights or door
openers).
4
Bosch Security Systems, Inc.
To activate this, click the icon for the relay next to the video image. The icon will be red
when the relay is activated.
Operation Manual
Operation | en
93
2014.05 | 1.0 | F.01U.291.520
Advertisement
Table of Contents
