Dropping Out Of Write On Subsequent Mix Passes - Sony OXFORD Operation Manual

7-5-7 Dropping Out of Write on Subsequent Mix Passes

There are four ways to drop out of WRITE when dropping back to previous moves. The buttons for these four
modes are on the mid right part of the panel at the base of the central LCD.
1 BUTT - (default) Where a jump occurs at the
drop-out point.
2 RAMP - Where a user defined time is taken to
slew to the previous move. (Set the time in
MIXES & CUES GUI).
3 AUTO-TAKE - Where the operator manually
fades to the previous move.
4 TO END - Where the fader position at the drop-
out point is recorded to the end of the Title for both
absolute and trim functions.
5
SELECT
TOUCH
TO
WRITE
TOP
READY READY READY
ABSOLUTE TRIM CANCEL
ROLL
AUD-
BACK
ITION
JOIN
Central LCD Screen panel layout
TOUCH AUTO TO
AUTO
HOLD TAKE END
OFF
AUTO
TOUCH
ISOL AUTO
BUTT RAMP
ISOL
CLEAR
ON ISOL
CANCEL
3 1 2 4
These four buttons inter-cancel but it is possible to use
different modes on different faders. This is achieved
by working in one mode first and then rolling back to
use another mode on other faders. Different modes
can be used on the same fader at different times.
5 TO TOP Push-Button
A related function allowing fader position to be
recorded from any point within the Title to the
beginning, for both absolute and trim. If a fader is in
record then it is the point at which {TO TOP} is pressed
which determines the level. If {TO TOP} is already on
then it is the point the fader is dropped into record.
Chapter 7 Session Management
7-21