Table of Contents
Advertisement
7-6 The Session Management™ Screen Pages
Note
CHS must be highlighted in the upper left SOURCE box for
a selection of channels, and CEN for any centre section
components.
8
Once the selection process is complete, click on
OK or press {ENTER} on the Control Keyboard and
this new layer will be added to the MERGE/
ASSEMBLE screen.
9
To edit the layer, click on it for its ADD LAYER
pop-up and adjust as necessary.
SOURCE CHANNELS Selector
Channels can be selected individually by clicking on
appropriate numbers to highlight them or click on ALL
and then de-select individual channels if more
convenient.
7-42
Chapter 7 Session Management
MERGE/ASSEMBLE - ADD LAYER pop-up
Click on RANGE to highlight it in order to select
contiguous blocks of channels. Then click on the first
and last of each block. De-select RANGE when
finished.
Click on CLEAR to de-select any highlighted
channels.
DESTINATION
Click on DESTINATION if the automation data is to
be applied to different numbered destination channels.
Make sure that the number of destination channels
selected matches the number of source channels,
including multiple blocks.
HIDE, SHOW and DELETE LAYER
Click on HIDE LAYER or DELETE LAYER as
appropriate. The data for a hidden layer will not have
any effect on what is heard. Click on SHOW LAYER
to bring it back.
Advertisement
Table of Contents
