Table of Contents
Advertisement
Note
{USE MASK} inter-cancels with {EQ A} or {EQ B} or
{DYNAMICS}. But {EQ A}, {EQ B} and {DYNAMICS} can be
used in any combination. If {EQ A} and {EQ B} are on
simultaneously, the Filters are also included in Copy and
Link operations.
Adjusting offsets with Faders and Knobs
The offsets between linked control functions can be
adjusted in a number of ways.
• Faders
To adjust offsets between faders, touch and hold one
and adjust any others in the Link Group.
• Definable Knobs (such as Pans)
To adjust offsets between definable knobs, press and
hold one knob and adjust any others in the Link
Group.
• Other Knobs (e.g. EQ or Dynamics sections)
To adjust knobs in the assignable channels section
areas, de-select the channel from the Link Group,
make the adjustments and then re-link that channel
into the Link Group.
It is possible, with EQ panels for example, to press
and hold a knob on one side of the control surface
and adjust the same knob on a linked channel the
other side.
COPY using the GUI
The COPY and CP DYN buttons in the GUI allow the
copying of channel functions using two GUI pop-ups.
The definitions for COPY and CP DYN are:
COPY
• Copies the static settings of controls.
CP DYN
• Copies the Dynamic Automation
data for automated controls and
static settings for others.
All Copy functions will affect channel controls
according to the Copy DEFAULTS fields.
Click on COPY for pop-ups in the following order:
SELECT SOURCE CHANNEL pop-up
Click on the required source channel to highlight a
source. As soon as one is highlighted the destinations
pop-up will appear.
DESTINATIONS FOR SOURCE CHANNEL
Click on DESTINATION CHANNELS to highlight
them or click on the screen menu buttons:
• To send copy data to all channels.
ALL
• Highlight the first and last channel of a
RANGE
range.
It is possible to mix these function i.e. click on ALL
and un-highlight a number of channels, for example.
Click OK, and the SELECT SOURCE CHANNEL
pop-up appears ready to select another source channel
and more destinations, or click OK to finish the
operation.
Chapter 7 Session Management
7-57
Advertisement
Table of Contents
