Table of Contents
Advertisement
7-7 Dynamic Automation Moves
Selecting Channels
Channels can be selected individually by clicking on
appropriate numbers to highlight them, or clicking on
ALL and then de-selecting individual channels if more
convenient.
To select adjacent channels in a block, click on
RANGE which highlights orange. Then click on the
first and last of each block. De-select RANGE when
finished.
As soon as any channels are selected the COMMIT
button lights orange and clicking this will action the
ready enable function. But first make sure the correct
control types are highlighted in the selector block to
the left.
Selecting Controls
The control types are selected using the block on the
left of the GUI. Click on the appropriate buttons to
highlight in orange the channel sections required, such
as EQ and Dynamics.
Click on ALL to highlight the complete channel then
de-select the sections not required or, if more
convenient, click on NONE to de-select all sections
and then click on the ones required.
CHANNEL Selector
Below is a brief description of what control types each
button will select.
Note
Some of the controls, such as Routing Switches, are not
automated dynamically but will be loaded as Snapshot
Automation. Each section below is annotated accordingly.
ALL
• Highlights All Channel Controls and I/O.
CH I/O (Snapshot)
• Channel Input sources and Output destinations, with
gain settings (not channel insert).
INPUT (Dynamic)
• Mic, Line and M/T input selector and Phase switches.
PATH (Dynamic)
• 8 section Channel Path selector and IN buttons.
7-82
Chapter 7 Session Management
DYNAMICS (Dynamic)
• All Dynamics section controls.
F ASSIGN (Dynamic)
• All Free Assign Area controls, currently just Delay in
this version.
EQ (Dynamic)
• All Equaliser controls (not Filters).
FILTERS (Dynamic)
• All Filter controls.
INSERT I/O (Dynamic)
• Analogue or digital I/O related to the Channel Insert.
SENDS (Dynamic)
• All Send levels, their Pans and Cuts.
M/T ROUTE (Snapshot)
• Multitrack Routing.
CH ROUTE (Snapshot)
• Channel Routing.
M/T GROUP (Dynamic)
• Multitrack Group Cut and Trim
M/T MISC (Dynamic)
• Multitrack group monitor levels, Pans and Cuts.
M/T SND (Dynamic)
• Multitrack Send Fader.
CUT (Dynamic)
• Multitrack Send Cut switch.
PAN (Dynamic)
• Multitrack Send Pan setting.
CHAN (Dynamic)
• Channel Fader.
CUT (Dynamic)
• Channel Cut switch.
PAN (Dynamic)
• Channel Pan setting.
Advertisement
Table of Contents
