Table of Contents
Advertisement
3-10 Basic Console Operations
3-10-10 To Bounce Tracks
1
7
1
Press {ACCESS} for the desired Channel.
2
Make sure {CHANS} is selected on the Select To
Faders panel (fire-up default).
3
At the Routing panel, select {CHANS} . The { L }
and { R } buttons will be de-selected automatically
so that the channel output is no longer routed to the
Main Output Bus.
4
At the same panel select the destination tracks
required for the bounce, in the ROUTE TO
TRACKS section. Fader and Pan settings will be
retained (L to odd-numbered tracks, R to even).
3-28
Chapter 3 Getting Started
5
8
3
4
2
6
5
Select {ACCESS} for the first of the new tracks.
6
On the Input Channel & Inserts panel, select
'MULTI' and its large { IN } button in one of the
eight windows. Repeat for other bounce tracks.
7
Select the {SEND} on the channels to which the
bounce is routed, for a monitor signal for those
tracks.
8
Set the monitor level for the new track(s).
9
The original balance will be bounced down to the
selected multitrack tracks. Repeat steps 1 to 4 for
other tracks to be bounced down.
Advertisement
Table of Contents
