Table of Contents
Advertisement
6-2 Channels Section Panels
CH INPUT
0
IN
6-34
Chapter 6 Technical Descriptions
INPUT CHANNEL
INPUT CHANNEL & INSERTS
1
2
IN
IN
5
6
IN
IN
Source point options for Sends
Input channel source points for the Sends in detail
This diagram illustrates the channel path as laid out at the Input Channel &
Inserts panel. Source points may be taken from after any of the processing
block windows, 1-8, as well as before the first block, and after the last one,
post the channel fader. The diagram shows the extra source points as
imaginary windows within the channel path. The Source point pre
window -1- will be displayed as CH INPUT, which takes a totally clean
signal from post the input gain stage. The Source post fader is labelled
C OUTPUT as displayed on the 8 character display in the SOURCE
selector area.
M/T Send Fader source point for Sends
A further option as a source point for Sends, is the signal post the M/T
Send Fader. This is indicated by MT SEND in the Source display
(see page 6-37 for more details).
3
4
IN
IN
7
8
IN
IN
CHANNEL
FADER
CH OUTPUT
9
IN
Advertisement
Table of Contents
