Table of Contents
Advertisement
Indication of inputs and outputs already in use
The I/O is assigned using the GUIs illustrated on the following pages.
Various pop-ups are used to display sources and destinations. Objects
already in use will be indicated by [xxx]. For example if ADC10 is in use
it will be indicated as [ADC10].
Printing GUI pages
All GUIs displayed on the channel LCDs can be printed, one at a time,
using the following procedure:
• Select the PREF page on one of the LCDs. It does not have to be the
LCD displaying the GUI to be printed and often it is more convenient to
use another.
• Click on PRINT in the box lowest right.
• Move the cursor into the screen to be printed if it is not already there.
This can done with a Trackerball or by pressing the SELECT button
below the LCD just once.
• Once the cursor is displayed on the screen to be printed, press
SELECT button below the LCD to print the image.
• This is a one-shot operation and once the printing has been actioned the
PRINT option in the PREF page reverts to SELECT.
• Click on PRINT once more to print a second or further GUI image.
Note:
This print output function requires the system to be configured with a Postscript
compatible printer.
the
5-13
Chapter 5 Control Screens
Advertisement
Table of Contents
