Table of Contents
Advertisement
{PRINT} {TITLE} {ENTER}
Prints details of the current Title.
Note:
"Print" output commands require the system to be configured with a Postscript
compatible printer.
Command Key Functions
{GLOBAL DROP-IN} Key
Causes all controls in automation 'ready' status to drop in to automation
write.
{GLOBAL DROP-OUT} Key
Causes all controls to drop out of automation record returning to
automation 'ready' status.
Note:
'Film Mode' allows the system to be set up so that {GLOBAL DROP-IN} and
{GLOBAL DROP-OUT} are operational on all controls except Faders, Cuts and
Pans (see section 7-7-9).
"UNDO" & "REDO" for Automation Data
{UNDO} Key
Causes the system to go back one mix pass at a time for each UNDO
through the currently unsaved mixes in memory, until the point of the last
SAVE MIX command point is reached.
{REDO} Key
Reverses the effect of UNDO commands one by one.
{UNDO ALL} Key
Reverts all the way back to the last SAVE MIX command point.
{REDO ALL} Key
Cancels the effect of the UNDO ALL key.
Ranges and Lists
Channels, Control Groups and the Main Fader can be specified in
command lines for certain functions:
Ranges are specified with '..' as a separator.
1..108
= Channels 1-108
01..032
= Control Group Faders 1-32
00
= Main Fader
Individual items are separated by '.'
2 . 4 . 25
= Channels 2, 4, and 25
Chapter 6 Technical Descriptions
6-65
Advertisement
Table of Contents
