Table of Contents
Advertisement
1
3
4
2
9
!º
!¡
Upper Ancillary Push-Button Block
1 SET GLOBAL DELAY Push-Button
This delay function, up to 80ms, is in addition to the delay function within
channels. It allows channels to be delayed or advanced, relative to other
channels, on a global basis. The delay is inserted at the channel output, pre
fader.
Note:
The Global Delay function is usable only when {CHANS} is selected at the
SELECT TO FADERS panel. It is not operable when {FADs 0dB} is selected
either.
Global Delay procedure:
1
Press {SET GLOBAL DELAY} and it flashes. The 8 character dot display
above the definable knob situated above the Monitor Level indicates
the current Global Delay value. An arrow to the left of the display
alternates to alert that this function is displayed. The lower {ACCESS}
buttons will also go out.
5
6
7
8
ALL
ALL
ALL
I/O
ROUTE
STATUS
GUIs
GUIs
GUIs
!™
!£
!¢
!∞
Chapter 6 Technical Descriptions
6-55
Advertisement
Table of Contents
