To Monitor Signals To And From Tape - Sony OXFORD Operation Manual

3-10 Basic Console Operations

3-10-4 To Monitor Signals To and From Tape

4 1 7
1
Press {ACCESS} for the desired Channel.
2
Select {CHANS} on the Select To Faders panel
(fire-up default).
3
At the Input Channel & Inserts panel, select
'MULTI' in window number 4 using the { + } and
{ – } buttons either side. Select its large { IN }
button to insert the multitrack into the signal path.
4
At the Pans panel, press {SEND} to select the signal
being fed to tape
3-22
Chapter 3 Getting Started
5 2 3
5
Or press {SEND} to select the signal from tape.
6
Open the Main Fader and turn up the CR Monitor
level.
7
Use the Channel Fader to adjust monitor level via
the Main Output Bus.
6